Photos are examples. Before we print, we send you a preview of your design to OK.
Feather Angled Flag
A tall feather flag with an angled bottom edge, for indoor or outdoor use.
Please note: The price shown is an estimate and may change before your order is final, for example after we check your file, options and shipping. We’ll send your final price in an invoice. Nothing is charged to your card until you approve and pay that invoice.
Your photo or design. Optional. You can send it later.
Choose your options to see your price.
A tall feather flag with an angled bottom edge, for indoor or outdoor use.
The feather angled flag has a long, narrow shape with an angled cut at the bottom. It is tall enough to be seen from the street and works well at storefronts, dealerships, events and trade shows. It can be used indoors or outdoors with the right base.
The graphic is dye-sublimated on polyester mesh. Single-sided flags show the design through to the back as a mirror image, while double-sided flags have two prints sewn together with a blockout layer between them so both sides read correctly. It comes with a pole set and a ground stake for grass; for pavement or indoor floors, add a cross base or square base.
- Three heights from 10.5 to 18 ft
- Single or double sided
- Pole set and ground stake included
- Washable polyester mesh
- Hard-surface bases sold separately
Specifications
- Material
- 4 oz polyester mesh, dye-sublimated
- Single sided print-thru, or double sided with blockout layer
- Sizes
- Medium 10.5 ft, Large 14 ft, X-Large 18 ft (assembled height)
- Graphic size
- Medium 24 in x 104 in, Large 28 in x 138 in, X-Large 24 in x 183.5 in
- Pole set
- Tool-free interlocking poles
- Sleeve
- Black nylon, on the left or right
- Base included
- Aluminum ground stake for grass and soft ground
- Hard-surface bases
- Cross base, cross base with water bag, or steel square base (sold separately)
- Kit
- Flag, pole set and ground stake
- Use
- Indoor and outdoor
What’s included
- Flag + pole + ground stake: Printed flag (dye-sublimated 4 oz polyester mesh, single sided print-thru), Tool-free fiberglass/aluminum pole set (4 pc Medium & Large, 5 pc X-Large), Aluminum ground stake for soft ground (swivels in the wind)
- Flag only: Printed flag (dye-sublimated 4 oz polyester mesh, single sided print-thru), Black pole sleeve sewn on, fits a standard feather angled pole set, No pole or base: use your own existing hardware
What you’ll need
Sold separately or provided by you.
- Cross base or square base for pavement, decks or indoor floors (sold separately)
- Water bag to add weight to a cross base (sold separately)
- Carry bag, if you want one for travel or storage (sold separately)
Preparing your artwork
- Use the supplied template for your size; the angled shape means corners are trimmed.
- For double-sided flags, send two separate files.
- Keep the key message in the upper and middle part of the flag where it is most visible.
Not sure about your file? Send it anyway — we check every file and send a proof before printing. Ask us a question
