Trade Show & Events

Tent Full Wall

A printed full-height wall that closes one side of your event tent.

Comes with: One printed full wall with sewn-in hook-and-loop straps (no extra hardware needed)

Starting at $349.99Shipping not included. We add shipping and tax to your quote.

Please note: The price shown is an estimate and may change before your order is final, for example after we check your file, options and shipping. We’ll send your final price in an invoice. Nothing is charged to your card until you approve and pay that invoice.

Your photo or design. Optional. You can send it later.

Design templates

Exact print size with bleed and safe lines marked. Design on your own layer, delete the guide layer, then upload your file.

Tent Full Wall
ShippingNot included · added to your quote
Estimated total before shipping

Choose your options to see your price.

Overview

A printed full-height wall that closes one side of your event tent.

A full tent wall hangs from the frame just under the canopy and reaches to within about 4 in of the ground. It gives your tent a branded backdrop and can also help block wind at outdoor events.

The wall is printed single-sided by dye sublimation on weather-resistant tent fabric, and sewn-in hook-and-loop straps wrap around the upper frame and legs, so no extra hardware is needed. Choose the 10, 15 or 20 ft size to match the side you are closing. On 10 x 15 and 10 x 20 ft tents, the short sides take the 10 ft wall and the long side takes the 15 or 20 ft wall; they cannot be swapped.

  • Fits 10, 15 and 20 ft tents
  • Attaches with hook-and-loop straps
  • No extra hardware needed
  • Can go on any side of the tent
  • Doubles as a windbreak

Specifications

Material
6 oz tent fabric (600 x 600 denier), waterproof coated
Print
Full-color dye sublimation, single-sided
10 ft wall
113 x 78 in (any side of a 10 x 10 ft tent, short side of 10 x 15 and 10 x 20 ft tents)
15 ft wall
170 x 78 in (long side of a 10 x 15 ft tent)
20 ft wall
228 x 78 in (long side of a 10 x 20 ft tent)
Attachment
Sewn-in hook-and-loop straps to the upper frame and legs
Care
Hand wash with a soft brush, mild soap and warm water; not machine washable

What’s included

  • One printed full wall with sewn-in hook-and-loop straps (no extra hardware needed)

What you’ll need

Sold separately or provided by you.

  • A compatible aluminum hex event tent frame to hang it on (sold separately)

Preparing your artwork

  • Use the template for your wall size, since the short-side and long-side templates are different.
  • Keep important content above the bottom few inches, since the wall stops short of the ground.
  • Supply CMYK artwork at 150 dpi or higher, with fonts converted to outlines.

Not sure about your file? Send it anyway — we check every file and send a proof before printing. Ask us a question

Need help choosing?

Talk to our team about sizes, materials and artwork. Mon–Fri 9am–4pm.